top of page



Troqueladora Digital

The Valloy Duoblade SX has been developed based on its predecessor Duoblade S and is known as the fastest digital die cutter on the market. This fast and inexpensive digital label finishing equipment has a unique design concept that allows it to differentiate itself from its competitors. This is a hybrid system, combining a flat bed and a roll-to-roll system.


Technical characteristics

It has a printing speed of up to 7.26 m / min.
Printing technology: 4 colors (CMYK) LED technology.
Print processor: 933 MHz, 2G.
Preparation time: less than 28 sec.
Interface: TCP / IP.
Material width: Min. 210 mm, Max. 330 mm.
Maximum printing width: 304 mm.
Maximum printing length: 1.2 m.
Type of materials: 50-350 microns. * Paper, thin, high gloss and matte
* Film: PET (white, transparent, silver, gold), PP, PE, PVC, PA.
Resolution: 1,200 x 2,400 dpi.
Toner Life: CMY - 25,000 (A4, 5% coverage), K - 26,000 (A4, 5% coverage).
Drum capacity: 100,000 prints.
Size: 1,400 x 850 x 1,600 mm. (HxWxD).
Weight: Net 350 Kg. Gross 425 Kg.
Operating environment: Temperature 20-23ºC; Humidity 45-55%.
Power: 220-240 V AC, 50-60Hz, @ 3.8KW.
Registration sensor for pre-printed or pre-cut material.
Unwinder and Rewinder: Maximum roll diameter 450 mm. Max. roll weight 47.2 Kg.
Monthly cycle: 20,000 m2.
Automatic pneumatic chucks.
Splicing table for roll change.
Media pre-processing with built-in ionizer.
Belt cooling system (Air conditioning).
Belt guide as optional.
Electric tension control by brake.
Antistatic brush.
Variable data printing.


Troqueladora Digital

Paper transport is only forward, without the need to go back and forth repeatedly like others. So the registration accuracy of the Valloy Duoblade SX is excellent. The automatic web guide adjustment system ensures correct feeding during operation.

The dual head system increases speed and a maximum of four heads can be installed at the same time. Pressure can be electrically controlled differently for each head and two different settings can be saved for each head. The vacuum flatbed holds the material firmly with a cutting area of ​​320 x 400 mm.

For more information contact us

¡Bien! Mensaje recibido

bottom of page